An Error Occurred While Internet Connection Sharing Was Being Enabled REPACK
If you want to enable Internet Connection Sharing, your first requirement is two network connections. First network connection is obviously for the internet while the other network connection is for local area network. You can manually enable Internet Connection Sharing.
An error occurred while Internet Connection Sharing was being enabled
The very first solution to solve the error which occurred while Internet Connection Sharing was enabled, our first responsibility is to check whether all the basic features that should be enabled to use Internet Connection Sharing are enabled or not. Enable the list of features mentioned below.
I've been having problems with my ICS (Internet Connection Sharing) ever since last week's update on Windows 10. It all started when I was unable to start my Mobile Hotspot, neither through the Action Center, nor through the oldfashioned way by netsh commands on Command Prompt. After a restart, I realized that ICS was not enabled for my ethernet connection and trying to enable it gives me the "An error occurred while internet connection sharing was being enabled" error message.
Normally internet connections can be shared by home users by using ICS (internet Connection Sharing) or by making an Ad-hoc network to allow other devices to share a single connection. Other alternative methods require connecting multiple computers by using Ethernet cables connected to the modem. While you can use a Wi-Fi router for connecting an Android or Symbian phone to the internet, your router might not be able to support too many devices. MHotSpot is a portable application which simplifies the process of sharing your wireless network connection with other computers and devices such as Android, Symbian phones, printers and Tablet PC. MHotSpot does not have any complex settings and can share an available wireless network at your home or office.
While setting up a WiFi hotspot & sharing your active internet connection in Windows you may have faced an error that displays Error 765: internet sharing cannot be enabled. A LAN connection is already configured with the IP address that is required for automatic IP addressing.
Download and Install Advanced System Repair Tool and scan your PC. It has the large database with 25 million of files. It will find all the damaged or deleted system files and reinstall them with the fresh one. After, optimizing with Advanced System Repair Tool, try to run internet connection sharing wizard.
616 - Anasynchronous request is pending.617 - The port or device is already disconnecting.618 - The port is not open.619 - The port is disconnected.620 - There are no endpoints.621 - Cannot open the phone book file.622 - Cannot load the phone book file.623 - Cannot find the phone book entry.624 - Cannot write the phone book file.625 - Invalid information found in the phone book.626 - Cannot load a string.627 - Cannot find key. 628 - The port was disconnected.629 - The port was disconnected by the remote machine.630 - The port was disconnected due to hardware failure.631 - The port was disconnected by the user.632 - The structure size is incorrect.633 - The port is already in use or is not configured for Remote Accessdialout.634 - Cannot register your computer on the remote network.635 - Unknown error.636 - The wrong device is attached to the port.637 - The string could not be converted.638 - The request has timed out.639 - No asynchronous net available.640 - A NetBIOS error has occurred.641 - The server cannot allocate NetBIOS resources needed to support the client.642 - One of your NetBIOS names is already registered on the remotenetwork.643 - A network adapter at the server failed.644 - You will not receive network message popups.645 - Internal authentication error.646 - The account is not permitted to log on at this time of day.647 - The account is disabled.648 - The password has expired.649 - The account does not have Remote Access permission.650 - The Remote Access server is not responding.651 - Your modem (or other connecting device) has reported an error.652 - Unrecognized response from the device.653 - A macro required by the device was not found in the device .INF filesection.654 - A command or response in the device .INF file section refers to anundefined macro655 - The macro was not found in the device .INF file section.656 - The macro in the device .INF file sectioncontains an undefined macro657 - The device .INF file could not be opened.658 - The device name in the device .INF or media .INI file is too long.659 - The media .INI file refers to an unknown device name.660 - The device .INF file contains no responses for the command.661 - The device .INF file is missing a command.662 - Attempted to set a macro not listed in device .INF file section.663 - The media .INI file refers to an unknown device type.664 - Cannot allocate memory.665 - The port is not configured for Remote Access. 666 - Your modem (or other connecting device) is not functioning.667 - Cannot read the media .INI file.668 - The connection dropped.669 - The usage parameter in the media .INI file is invalid.670 - Cannot read the section name from the media .INI file.671 - Cannot read the device type from the media .INI file.672 - Cannot read the device name from the media .INI file.673 - Cannot read the usage from the media .INI file.674 - Cannot read the maximum connection BPS rate from the media .INI file.675 - Cannot read the maximum carrier BPS rate from the media .INI file.676 - The line is busy.677 - A person answered instead of a modem.678 - There is no answer.679 - Cannot detect carrier.680 - There is no dial tone.681 - General error reported by device.682 - ERROR WRITING SECTIONNAME683 - ERROR WRITING DEVICETYPE684 - ERROR WRITING DEVICENAME685 - ERROR WRITING MAXCONNECTBPS686 - ERROR WRITING MAXCARRIERBPS687 - ERROR WRITING USAGE688 - ERROR WRITING DEFAULTOFF689 - ERROR READING DEFAULTOFF690 - ERROR EMPTY INI FILE691 - Access denied because username and/or password is invalid on thedomain.692 - Hardware failure in port or attached device.693 - ERROR NOT BINARY MACRO694 - ERROR DCB NOT FOUND695 - ERROR STATE MACHINES NOT STARTED696 - ERROR STATE MACHINES ALREADY STARTED697 - ERROR PARTIAL RESPONSE LOOPING698 - A response keyname in the device .INF file is not in the expected format.699 - The device response caused buffer overflow.700 - The expanded command in the device .INF file is too long.701 - The device moved to a BPS rate not supported by the COM driver.702 - Device response received when none expected.703 - ERROR INTERACTIVE MODE704 - ERROR BAD CALLBACK NUMBER705 - ERROR INVALID AUTH STATE706 - ERROR WRITING INITBPS707 - X.25 diagnostic indication.708 - The account has expired.709 - Error changing password on domain.710 - Serial overrun errors were detected while communicating with your modem.711 - RasMan initialization failure. Check the event log.712 - Biplex port is initializing. Wait a few seconds and redial.713 - No active ISDN lines are available.714 - Not enough ISDN channels are available to make the call.715 - Too many errors occurred because of poor phone line quality.716 - The Remote Access IP configuration is unusable.717 - No IP addresses are available in the static pool of Remote Access IPaddresses.718 - PPP timeout.719 - PPP terminated by remote machine.720 - No PPP control protocols configured. 721 - Remote PPP peer is not responding.722 - The PPP packet is invalid.723 - The phone number, including prefix and suffix, is too long.724 - The IPX protocol cannot dial-out on the port because the computer is anIPX router.725 The IPX protocol cannot dial-in on the port because the IPX router isnot installed.726 - The IPX protocol cannot be used for dial-out on more than one port at atime.727 - Cannot access TCPCFG.DLL.728 - Cannot find an IP adapter bound to Remote Access.729 - SLIP cannot be used unless the IP protocol is installed.730 - Computer registration is not complete.731 - The protocol is not configured.732 - The PPP negotiation is not converging.733 - The PPP control protocol for this network protocol is notavailable on the server.734 - The PPP link control protocol terminated.735 - The requested address was rejected by the server.736 - The remote computer terminated the control protocol.737 - Loopback detected.738 - The server did not assign an address.739 - The remote server cannot use the Windows NT encrypted password. 740 - The TAPI devices configured for Remote Access failed to initialize or werenot installed correctly.741 - The local computer does not support encryption.742 - The remote server does not support encryption.743 - The remote server requires encryption.744 - Cannot use the IPX net number assigned by the remote server. Check theevent log.745 - An essential file is missing. Re-install Dial-Up Networking